The Story of a Commission

 I mentioned in my last post that I was working on a two piece commission. Initially the people commissioning had asked for a large piece- larger than what I normally work or can manage on my littlest Bernina workhorse which has a small throat. So we agreed that I make two pieces which are still on the large side of the size I normally work but still manageable. So the pieces were to measure 150 cm x 100 cm.

The commissioners also had suggested some colours in the dyed background cloth. It took  quite a few attempts to get cloth that I  thought would work which I then sent to the people to choose.

Above are some of the fabrics I dyed- there were more but I had to be mindful that they needed to go together as a set, plus I needed to be able to print on them as the commissioners had indicated they liked the monoprinted  pieces I had done with foliage from my morning walks. This method of dyeing gives great results but it is not easy to control where dark and light appears nor how the colours will bleed into each other. The minute you put blue and yellow together you end up with greens and things can become green too quickly - but it also needed dark colour in there for contrast.

Once the background fabrics had been selected I started the printing with foliage that i collected on morning walks,

The photo above is of the  printing on the dyed pieces of fabric-  once stitching goes in then things can be accentuated a bit more. Once I had the first piece basted the people commissioning had an additional request as they were fungi enthusiasts, they asked if fungi could be included in the printing process. By this stage I had already started stitching in the foliage details so the piece was already batted up and had been partially stitched. This took a bit of procrastinatng  as to how I might do it and also as the fungi blocks I had made last year were very blocky and I was loathe to cut them to shape as they are a set with which I intend to do something booky at some point in time. So the only solution was to make some new linocuts that I could somehow manoeuvre into the unstitched spaces.

Phew! It worked, as I was petrified I would spill some printing ink or get a dodgy print which would ruin the whole piece as by this stage I had already done a fair bit of stitching. You can to some extent fix misprints  with stitching but this was quite daunting as it was quite a large piece which already had quite a lot of stitching in place. The end result enthused me sufficiently to make another toadstool linocut after encountering one on a recent morning walk.

It was too difficult to include this little toadstool in the first piece I had already started stitching but I was able to print it onto the second piece I had to make.  These pieces have been very densely stitched- I call it  free machine drawing because essentially I am creating drawings with my machine- and these pieces are large drawings- really large drawings all done on a little domestic Bernina 325 which is the smallest machine in the Bernina range. I dream of a large machine but I am thinking that is what it will remain a dream. But meanwhile whilst it is not easy manoeuvring such a large piece under a small machine it is possible and I have been doing it for a very long time/. Some of the stitching progress...

In this stitching process threads are like my pencil- I use them for line and to create interest in the background and for detailing. I would have to say that thread is of number one importance in the work I create and I have been fortunate to have Aurifil sponsor some of my thread in the past . I use 28 weight cotton Mako thread which is not easily available in Australia but is wonderful to work with and gives such great line and accent.

The selection of threads I used- there are some non-Aurifil threads there mainly as I did not have those colours in my thread box and  it is difficult to get the cobs of Mako 28 thread in Australia as I know of no store that stocks the 28 weight thread in a large selection. ( I am aware that Amity Threads in Torquay stock a good range of Aurifil thread but not much of the 28 weight thread which they can order- but I didn't have the time for this ) . The next most important thing for my work is the weight of batting. I use Matilda's Own wool/Polyester batting - it will take a lot of stitching and not stretch or buckle- and I stitch very densely. 

So the last few weeks have been a marathon of stitching. Then the squaring up which I did out at Arc Yinnar as they had a table big enough . Normally i do this on the floor but because these two pieces will hang together they need to be as much the exact same size as is possible when dealing with textile. I also decided to do faced bindings as I did not really want anything to distract from the flow of the stitching.

And so finally after about 3 months from first contact these pieces have been finished and sent to their new owners. They liked the photos I sent but it is simply not the same as seeing the pieces in the flesh. And so here are the finished pieces, not photographed terribly well I am afraid- there was too much light coming from the left.

In the end  I was actually quite pleased with how they looked- there is always that anxiety of whether the people who have commissioned the piece will like what you have done, the anxiety of whether it really works. Whilst I have made forest quilts before, these are a little different because there is more blue in them than I would normally do in the background dyeing and also the printing I do has subtly changed since last year when I started incorporating foliage from my morning walks into my work. The addition of the linocuts was an additional challenge and something I had not done before but I liked how they looked in these pieces.

Printing and Lovely April Weather

 The weather has been beautiful this month- mostly warm, gorgeous autumn weather. My garden needs a really good clean up but haven't had much time to do it and really need some help for the heavier work. I don't mean just mowing but helping rebuild some garden beds which are struggling with the ever invasive grass. I had tried no dig and still want to  but the grass is just a nightmare to deal with so I am going to resort to some heavier interventions.

I also fell off the daily walks trolley- but have made a concerted effort this week to get out more often- hopefully it will push me into regular walking again as I do enjoy it when I go out. The  nardoo has spread almost entirely over one part of the Turtle Dam at the bushland where I walk and the  fungi are starting to make an appearance with the cooler sometimes foggy nights. I have been working on a traveller's blanket inspired by nardoo although at the moment it is going slowly as I am working on a large commission which I really want to try and get finished late this week or early next week.

The commission got me back to doing some mono-printing but because of the warm ambient air at the moment it is not totally successful as the ink dries a bit quickly on the plate and I can't get the lovely ghost prints which is really like. Maybe I will have to get up earlier but then my shed is too dark to work in. There had been plans to put lighting out there but it's been put on hold because the money has been used to put food on the table during this time of covid.

The commission piece is in two sections and I have finished the first one and  I included some fungi linocut prints in at the request of the commissioners. I actually really like the fungi in amongst the foliage and thought I would make a little toadstool as well.

I have been having a lot of fun printing it onto monoprints. I am selling the monoprints with linocut prints if you are interested.

The fabric background is about 30 cm x 55 cm and has been hand dyed and have then been  hand printed with actual foliage and then with linocuts. They are $40 each- message me if you are interested.

I have also been working a little in my journal- another thing which I kickstarted again this week to get rid of the brain fuzz and I might start creating another workbook, after being inspired by Bruno Leti's workbook #15- it is good to steadily work somewhere to work out ideas and I need to develop some new work for an exhibition next year at Meeniyan Gallery. Last weekend  I went and looked at the space and also spent some time at Venus Bay and again the weather was gorgeous. The photo was on a walk late in the afternoon when the clouds had drifted in.

April Already

 The last two months have simply flown by busy with open exhibitions at ArcYinnar and  teaching at Grampians Textures in March. What a delight to be amongst like minded textile enthusiasts again and even better to actually be working again and earning some money.  We did a lot of transfer printing and linocut printing at Textures and participants developed a set of stamps to use for coordinating in the future. The beauty of linocut printing is that it is easily done at home and does not need a large space in order to print fabric. I also met some people whom I have known for some time via the internet - it is so lovely to be able to put a face to the communications

I have also been busy processing some of the food I have grown, making lots of pasatta, dilly beans and eggplant pickle, but on the whole it was a less than stellar year in the vegetable garden, and the continuing battle with grass and slugs/snails nearly drove me mad. Much as I hate to admit it the no dig method of gardening has encouraged rampant grass spreading so I am going to have to resort to something stronger than cardboard to deal with the grass so there will be quite some remaking of beds in the very near future.

Then out of the blue I was commissioned to make two pieces for a home in Perth and so it has seen me create a forest scene with some different elements and that also included using linocut to add to the scene.

I am still stitching on the pieces though the end is in sight and I am rather enjoying the way the little fungi are looking once they are stitched.